Reverse Osmosis System 30000 Liter Water Treatment Plant Drinking Water Purification Machines

30,000L/H R.O. Water Purification System

Reverse Osmosis System 30000 Liter Water Treatment Plant Drinking Water Purification Machines

RO Water Purification System, Model:LN-RO 30,000L/H

1. Design Basis

1.1 Produced water’s application: Bottle drinking water

1.2 The capacity of produced water: 30,000L /H

1.3 System Configuration: Pretreatment + One Stage Reverse Osmosis Desalination System.

1.4 Designed recovery: 50-65%.

1.5 Rejection rate: ≥ 97%

1.6Voltage: 3 phases, 380V, 50Hz; Power: 48kW 

2. System requirements:

2.1 Inlet pipelines: inlet pipe connected with the raw water tank entrance.

2.2 Cable: According to the calculated capacity of electric power, the user should send it on the control cabinet.

2.3 Outlet water pipelines: From pure water tank to the pure water using point.

2.4 Concentrated Water Treatment: Discharge to the wastewater pool (user considered).

2.5 Water temperature:5-35˚C

Process Description:

The process includes pretreatment and reverse osmosis system

1) Raw water pretreatment part:

Raw water contains many impurities, such as suspended solids, colloidal, organic and inorganic. To ensure Reverse Osmosis Desalination System at normal operation, the suspended solids, colloids, organic matters must be removed in advance, so that feed water to reverse osmosis system meets the requirement. So, the pretreatment part should be equipped. The pretreatment part includes: Mechanical Filter, Activated Carbon Filter and Security Filter.

(1) Mechanical filter:

Reverse osmosis equipment has the high requirement to the turbidity of the feed water, especially reverse osmosis water’s pollution index value requests less than 4 SDI and turbidity less than 1NTU. Multi-media filter filled with several specification quartz sand, which remove suspended solids, colloid from raw water.

(2) Activated Carbon Filter:

Reverse osmosis equipment requests residual chlorine content be less than 0.1mg / L, so used activated carbon filter removing chlorine from raw water avoiding reverse osmosis membrane getting contamination.

Meanwhile, it can adsorb organic matter in raw water. Activated carbon filter inside filled with the coconut shell refined activated carbon , for adsorbing the chlorine , organic matter, some pigments and harmful substances, reducing the chemical oxygen demand( COD).

Activated carbon is widely used in life water, the food industry, chemical and other industries. Due to large specific surface are and the surface covered with lots of micropores , therefore, activated carbon with high adsorption capacity.

(3) Security filter:

Security filters are micro-filtration equipment, playing the insurance role in the pretreatment, to prevent the particles into the water pump and reverse osmosis system.

2) Reverse osmosis desalination parts:

Water reverse osmosis unit can remove most of inorganic salts, particles, bacteria, viruses, heavy metals, and other soluble substances.

The rejection rate can reach 98%.It is simple, low energy consumption, non-pollution, etc, so, it is widely used for producing pure water.